Monthly Archives: February 2012

NEW : XForce stainless steel bolt-on exhaust to suit FORD FG Falcon XR6/G6E Turbo/ FPV F6

NEW : XForce stainless steel bolt-on exhaust to suit FORD FG Falcon XR6/G6E Turbo/ FPV F6

FORD FG Falcon XR6/G6E Turbo/ FPV F6 owners can now enjoy the performance¬†benefits¬†of a Stainless Steel XForce bolt-on exhuast system. Now¬†available¬†to suit FG XR6/G6E Turbo/ FPV F6¬†series , XForce’s bolt-on exhaust system comes in either a 3.5″ or 4″ system. Flow and performance is considerably increased.

FPV F6/XR6T 4 Inch Turbo Back System:

  • 4‚ÄĚ straight-through design through-out
  • 4‚ÄĚ Wide-open bell mouth dump-pipe
  • 4‚ÄĚ hi-flow metallic racing cat
  • Large center and rear oval mufflers, which is the key components to produce deep and sporty sound
  • 4‚ÄĚ round single-wall tip, or can be adapted to other style of tips.¬†Extra optional oval rolled ‚Äďin tips is provided
NEW : XForce stainless steel bolt-on exhaust to suit FORD FG Falcon XR6/G6E Turbo/ FPV F6
NEW : XForce stainless steel bolt-on exhaust to suit FORD FG Falcon XR6/G6E Turbo/ FPV F6

FPV FG F6/XR6T 3.5 Inch Turbo Back System

  • 4″ wide open bell-mouth style dump-pipe
  • 3.5″ hi-flow metallic racing cat
  • Oval center resonator
  • Oval rear resonator.
  • Dual 3″ Double-wall tips.
NEW : XForce stainless steel bolt-on exhaust to suit FORD FG Falcon XR6/G6E Turbo/ FPV F6

Video:

Watch this video on YouTube.

Read more http://blog.xforce.com.au.tmp.anchor.net.au/?p=425

NEW: XForce stainless steel bolt-on exhaust to suit FORD Focus XR5 Turbo

NEW: XForce stainless steel bolt-on exhaust to suit FORD Focus XR5 Turbo

photo by: wideopenthrottle.com.au

Now in stock is an all New XForce performance stainless steel bolt-on exhaust to suit the FORD XR5 turbo.  Individual sections and  full turbo back options are now available. For prices,availability and fitment please contact us or your nearest XForce dealer

NEW: XForce stainless steel bolt-on exhaust to suit FORD Focus XR5 Turbo

Focus XR5 Dump-pipe & Cat

  • 3″ Dump pipe with flexi bellow;
  • 3″ hi-flow metallic racing cat.

Focus XR5 Turbo-Back System

  • Pipe Size: 3″
  • Round Center Reosnator;
  • Oval Rear Muffler;
  • Dual Side Out 4″ Angle Cut Double Wall Tips.

Video:

Watch this video on YouTube.

Read more http://blog.xforce.com.au.tmp.anchor.net.au/?p=416

Impreza WRX Sedan 2009~2010

Impreza WRX Sedan 2009~2010

Turbo-Back System (WRX Sedan MY09+)

  • 3‚ÄĚ straight-through design through-out;
  • Wide-open bell mouth dump-pipe;
  • Option 1: Without cat;
  • Option 2: With hi-flow metallic cat (pre-cat), O2 sensor after pre-cat;
  • 3‚ÄĚ hi-flow metallic racing cat;
  • Hot-dog center resonator;
  • Two oval rear muffler;
  • Dual Side 4″ Double-wall, angle-cut tips;
Impreza WRX Sedan 2009~2010
Impreza WRX Sedan 2009~2010
Impreza WRX Sedan 2009~2010

*For some model cars, the CEL(check engine light) might be on after installation of after market dump-pipe and hi-flow racing cats due to the change of exhaust conditions. ECU tuning is recommended, please consult with professional performance tuning specialist regarding this matter.

Watch this video on YouTube.

Read more http://blog.xforce.com.au.tmp.anchor.net.au/?p=405

XForce axle back bolt-on exhaust system for CJ Lancer (MY08 onwards)

XForce axle back bolt-on exhaust system for CJ Lancer (MY08 onwards)
XForce is proud to announce its new lineup of Stainless steel axle back bolt on system to suit the CJ Lancer.  The XForce system replaces the restrictive factory unit, flow is increased thanks to the straight through muffler design and increased pipe size over factory, while still being under the legal DB rating. Designed to be a direct bolt-on, factory exhaust mounts are utilized with no modifications required to the stock rear bar.
XForce axle back bolt-on exhaust system for CJ Lancer (MY08 onwards)
XForce axle back bolt-on exhaust system for CJ Lancer (MY08 onwards)
  • Pipe Size: 2.5″;
  • Mufflers: Dual Oval;
  • Tips:3.5″ double wall, angle cut.
  • Tig welded in stainless steel
  • Direct replacement for factory unit.

Read more http://blog.xforce.com.au.tmp.anchor.net.au/?p=373

Bolt on XForce available for Corolla Hatch 2007

Bolt on XForce available for Corolla Hatch 2007

XForce now has a bolt on cat-back system for the popular and reliable 2007 Corolla Hatchback. The 2007 Corolla boasts the all newly developed 1.8 Dual VVT-i  2ZR-FE engine, delivering 100kW of power and 175Nm of torque.

Bolt on XForce available for Corolla Hatch 2007Bolt on XForce available for Corolla Hatch 2007

XForce bolt-on 2.5″ cat back includes :

  • Single 2.5″ pipe size
  • Center Resonator
  • Rear Round Muffler
  • Round 3.5″ Tip

From factory the Corolla’s exhaust system is a very¬†restrictive unit, installing an Xforce bolt on cat-back has shown increase in flow and gain in power, also produced deep sport sound.

Watch this video on YouTube.

 

Read more http://blog.xforce.com.au.tmp.anchor.net.au/?p=367