We’re all for performance vehicles here at XFORCE. When we first heard about Hyundai bringing a turbocharged variant of their funky Veloster to Australia, our ears flicked up with interest. Finally, we can say it’s here, and we’ve already knocked up a complete stainless system to suit!
At this year’s Australian International Motorshow, Hyundai wanted to display a cool, modified version of their latest turbo beast. The aim was to show people what can be done with a bit of creativity, and how a modified example will look. Because be honest, everyone will want to modify theirs to their own specification!
We were asked to jump onboard the project to create a neat, turbo-back system to help increase performance and sound. The result is killer, and we can’t wait to offer it to you guys for your own cars very soon.
This 3” stainless steel turbo-back system consists of dump-pipe,100-cell metallic cat, oval mufflers . The system will fit the factory stock bumper-bar tips, we also provide an optional twin centre-out angle-Cut tips, which are a little bit more aggressive than the factory stock tips. The sound it makes is something else, and you can certainly hear one coming. We’ll say that much.
The product is estimated for sale around Jan, 2012.
More information will be available in our web site soon, www.xforce.com.au
We’re stoked to announce that a car at the 50th anniversary of the great race is going to be wearing the XFORCE brand!
We have teamed up with Brad Jones Racing to sponsor their Dunlop Development series car which is piloted by Andrew Jones. Over the weekend, their V8 Supercar will proudly display the XFORCE brand on its bonnet. We’ve managed to get a sneak-peak photo of the race livery, which you can see below.
We all agree that it looks super-tough with the red and black scheme. It’ll certainly stand out compared to the more retro-inspired liveries that other entrants have chosen.
Team owner Kim Jones mentioned that it’s important to introduce new sponsors to a race team. And what better occasion than the 50th anniversary of Bathurst!
With the mighty twin-cam powered CRX now breathing well through the INJEN cold air intake, expelling spent exhaust gasses is the next step in promoting power gains. As well all know, an engine is a pump essentially, so the outlet or exhaust needs to be up to scratch if the intake is upgraded.
We teamed up with XFORCE and Kirrawee Mufflers to do a complete, custom exhaust system on the car. This included using XFORCE’s mandrel bends, header, catalytic converters and mufflers. If an off-shelf exhaust is not available for your car, XFORCE can supply products to put together a custom system to suit any vehicle.
Everything that was used was stainless steel, so it’ll last a lifetime, look great and emit a unique tone. XFORCE offer a large variety of mandrel bends at varying degrees, making it easy for fabricators to weld something together to suit your ride. The diameter we chose to suit the CRX was 2.25 inches, utilizing mandrel bends to keep the 2.25 inch consistent the whole way through.
The exhaust was tackled simply. As the whole system from front-to-back was being replaced, the boys from Kirrawee started at either end of the car and worked their way into the middle when constructing the system. This way, they can ensure that the mid pipe or B-pipe lines up with either end of the system and tucks up nicely against the body, aiding ground clearance.
A barrel resonator was installed just after the high-flow catalytic converter to help prevent in cabin vibration and drone that is often heard from cars with loud cannon style mufflers added to a standard system. After all, the car will be daily driven so some form creature comfort is required!
The stainless steel headers are off-shelf XFORCE items that they have created in order to promote scavenging and increase top end grunt. As the product has been tested properly, fitment and clearance against sub frames and other important components is not an issue. Not only are they functional, they also look great in the stainless finish! Once a few heat cycles go through them, they’ll end up a cool burnt purple colour.
Next, the secondary’s from the header were mated to the catalytic converter and the rest of the B pipe. This photo depicts how the off-shelf items fit up well against the under architecture of the car. Once the front lined up well, the rear was checked for clearances and fitment.
Trying to keep things in a factory OE fashion, we opted for a twin tip style exit. However, the tips we chose are larger in ID and staggered in positioning. It gives the car a tough, yet factory-esque look. We’re all for it!
Once everything was in check, the guys at Kirrawee tacked hangers onto the pipework to securely hold the rear muffler in place. A high flow stainless rear muffler was used, and combined with the high flow resonator earlier in the system. This duet ensures maximum performance gain minus the noise levels which is perfect for the cars dual purpose.
And the result? The motor certainly likes to turn more! The car feels a lot more eager to rev through the entire power band and certainly has gained torque as a consequence of this system. Replacing everything including cats ensured there no bottlenecking in the pipework. We will be bringing you sound clips in the next few weeks so you can all hear it for yourselves!